Voltage Stabilization Kit Stage 1 *SPARE*

Install this to prevent brake lights from randomly resetting while the brakes are pressed and held while the engine is ON. When this happens our Stop Alert function (triple brake flash) will reset and flash randomly. Some Kawasaki, Yamaha and Ducati motorcycles experience this and it is caused by a voltage dropping issue from the stator. If it drops below the threshold to maintain a solid brake it will reset everytime. Comes with T-tap connectors for easy installation onto our tail light brake and ground wire. Installation instructions included.

Note: Only install this if you have voltage dropping/connection issues on your brake circuit.

Symptoms include:
1. While pressing and holding front and/or rear brakes and the engine is on/idle, brakes continue to flash randomly while stop alert is enabled. Does not happen when the engine is OFF.

2. While pressing and holding front and/or rear brakes and engine under high RPMs, brakes continue to flash randomly while stop alert is enabled. Does not happen when the engine is OFF.

This kit is included in most of our tail light kits where we have expericenced it happens often on a certain make/model of a motorcycle. Only purchase if you need a spare.